ProSoft Technology MVI71-DFNT - Manual (Page 21)

MVI71-DFNT ♦ PLC 5 Installing and Configuring the Module
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 21 of 175
February 3, 2011
2 Installing and Configuring the Module
 Module Configuration
In This Chapter
............................................................................ 23
 Configuration File .................................................................................. 24
 IP Address ............................................................................................. 38
 Uploading and Downloading the Configuration File ............................... 39
 Module Data .......................................................................................... 41
This chapter describes how to install and configure the module to work with your
application. The configuration process consists of the following steps.
1 Modify the module’s configuration files to meet the needs of your application,
and copy the updated configuration to the module. Example configuration
files are provided on the CD-ROM. Refer to the Modifying the Example
Configuration File section, later in this chapter, for more information on the
configuration files.
2 Modify the example ladder logic to meet the needs of your application, and
copy the ladder logic to the processor. Example ladder logic files are provided
on the CD-ROM.
Note: If you are installing this module in an existing application, you can copy the necessary
elements from the example ladder logic into your application.