ProSoft Technology MVI71-DFNT User Manual
Page 85
MVI71-DFNT ♦ PLC 5
Reference
EtherNet/IP Client/Server Communication Module
User Manual
ProSoft Technology, Inc.
Page 85 of 175
February 3, 2011
Branches are displayed or hidden by clicking on the
or the icons.
4 When you have verified that the driver is not being browsed, go to
C
OMMUNICATIONS
>
C
ONFIGURE
D
RIVERS
.
You may see something like this:
If you see the status as running, you will not be able to use this com port for
anything other than communication to the processor. To stop the driver press
the
S
TOP
button on the side of the window:
5 After you have stopped the driver you will see the following.
6 You may now use the com port to connect to the debug port of the module.
Note: You may need to shut down and restart your PC before it will allow you to stop the driver
(usually only on Windows NT machines). If you have followed all of the above steps, and it will not
stop the driver, then make sure you do not have RSLogix open. If RSLogix is not open, and you
still cannot stop the driver, then reboot your PC.