ProSoft Technology MVI71-DFNT - Manual (Page 56)

Diagnostics and Troubleshooting MVI71-DFNT ♦ PLC 5
User Manual EtherNet/IP Client/Server Communication Module
Page 56 of 175 ProSoft Technology, Inc.
February 3, 2011
Press [7] to view communication status for the DF1 pass through server.
Viewing DF1 Server Status Data
Press [8] to display the configuration information for the client.
Viewing Client Configuration
Press [9] to view configuration information for the DF1 pass-through server.
Viewing DF1 Pass-Through Server Configuration
Press [0] (zero) to view configuration information for the DF1 pass-through port.
Viewing DF1 Pass Through Port Configuration
Press [@] to open the Network menu.
Opening the Network Menu
The Network menu allows you to send, receive and view the WATTCP.CFG file
that contains the IP, gateway and other network specification information. For
more information about this submenu, see Network Menu (page 61).
Press [ESC] to restart the module and force all drivers to be loaded. The module
will use the configuration stored in the module's flash memory to configure the
module.
Exiting the Program