ProSoft Technology MVI71-DFNT - Manual (Page 17)

MVI71-DFNT ♦ PLC 5 Start Here
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 17 of 175
February 3, 2011
1.6 Download the Sample Program to the Processor
To download the sample program from RSLogix 5 to the PLC processor
Note: The key switch on the front of the PLC processor must be in the REM position.
1 If you are not already online to the processor, open the Communications
menu, and then choose Download. RSLogix will establish communication
with the processor.
2 Click the Download button to transfer the sample program to the processor.
3 When prompted, choose Computer to PLC
4 RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.