ProSoft Technology MVI71-DFNT User Manual
Page 55

MVI71-DFNT ♦ PLC 5
Diagnostics and Troubleshooting
EtherNet/IP Client/Server Communication Module
User Manual
ProSoft Technology, Inc.
Page 55 of 175
February 3, 2011
Press
[W]
from the Main menu to warm boot (restart) the module.
Warm Booting the Module
This command will cause the program to exit and reload, refreshing configuration
parameters that must be set on program initialization. Only use this command if
you must force the module to reboot.
Press
[1]
to view client communication status. Use this command to view the
statistics of the DFNT client commands sent by the MVI71-DFNT. The following
illustration shows an example of the information on this screen.
Viewing Client Communication Status
Press
[2],
[3],
[4] or [5]
to view status data for the DFNT servers. The following
illustration shows an example of the status screen for the selected servers:
Viewing Server Status Data
2 = Display servers 0 to 4
3 = Display servers 5 to 9
4 = Display servers 10 to 14
5 = Display servers 15 to 19
Note: Some implementations of the DFNT protocol support fewer DFNT servers (for example,
5201-DFNT-BACNET, which supports only five servers, rather than the twenty shown in this
illustration)