ProSoft Technology MVI71-DFNT - Manual (Page 163)

MVI71-DFNT ♦ PLC 5 Reference
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 163 of 175
February 3, 2011
5.17.1 Troubleshooting
If you are unable to connect the software converter to the MVI71-DFNT you
should configure the communication parameter used in the network.
To establish communication between the local PC and the PLC processor, all
communication parameters at each part of the network must match. This means
that the communication parameters configured at the following parts of the
network should be the same:

PLC processor Channel 0 (Use RSLogix 5000)
 MVI71-DFNT configuration
 Serial/IP Software Converter
 RSLinx RS-232 driver (use the auto-config feature)