TA Triumph-Adler DCC 6526L - Manual (Page 73)

Preparation before Use
2-28
NOTE: Paper sizes are marked on the cassette.
4 Adjust the paper length guide to the paper size
required.
5 Load the paper in the cassette. Ensure the side to
be printed is facing up and the paper is not folded,
curled, or damaged.
IMPORTANT: Do not load paper above the triangle
mark located on the width guide.
• Before loading the paper, be sure that it is not
curled or folded. Paper that is curled or folded may
cause paper jams.
• Ensure that the loaded paper does not exceed the
level indicator (see illustration below).
• When loading the paper, keep the side that was
closest the package seal facing up.
• The paper length and width guides must be
adjusted to the paper size. Loading the paper
without adjusting these guides may cause skewed
feeding and paper jams.
• Be sure that the paper length and width guides rest
securely against the paper. If there is a gap,
readjust the guides to fit the paper.