TA Triumph-Adler DCC 6526L - Manual (Page 221)

Document Box
6-10
12 The number of copies screen appears. Set the
number of copies and press the OK key.
13 The file print confirmation screen appears. Press
[Yes] (the Left Select key). Accepted appears and
printing begins.
Quick Copy mode
This mode is used to print an additional copy of a document that has already been printed. If a document is
printed with Quick Copy selected in the Printing System Driver, the document will be simultaneously stored on
the RAM disk. The required number of copies can be printed whenever needed from the operation panel. If more
documents than the set maximum are stored, the oldest job will be overwritten each time a new job is stored.
When the machine power is turned off, jobs stored in this mode are erased. For the number of documents that
can be stored in Quick Copy mode, see Quick Copy Jobs on page 8-76.
1 Press the Document Box key. The Document Box
menu appears.
2 Press the  or  key to select [Job Box].
3 Press the OK key. The Job Box menu appears.
4 Press the or  key to select [Quick Copy].
5 Press the OK key. The user selection menu
appears.
6 Press the  or  key to select the user.
Copies:
a b
(1 - 999,---)
******** copies
---
Document Box:
a b
*********************
2 Polling Box
3 Job Box 1 Sub Address Box
Job Box:
a b
*********************
2 Quick Copy 1 Private Print
Quick Copy:
a b
*********************
l Maury l Fiala