TA Triumph-Adler DCC 6526L User Manual
Page 369
Default Setting (System Menu)
8-124
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
1
In the Sys. Menu/Count. menu, press the or
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or key to select [Timer Setting], and
press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
4
The Timer Settings menu appears.
5
Press the or key to select [Err. Clear Timer].
6
Press the OK key. Err. Clear Timer appears.
7
Press the or key to set the Error Clear Timer.
Set the amount of time before clearing errors in
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[
Exit
]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[
Exit
]
1 Language
Login User Name:
L
b
*******************
Login Password:
[ Login
]
Timer Setting:
a b
*********************
2 Sleep Timer
3 PanelReset Timer
[
Exit
]
1 Err. Clear Timer
Err. Clear Timer:
*
b
(5 - 495)
******30*sec.