beautypg.com

TA Triumph-Adler DCC 6526L User Manual

Page 409

background image

Default Setting (System Menu)

8-164

9

Press the  or  key to select [HTTP/HTTPS] or
[HTTPS only].

10

Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.

LDAP Security

Specify the protocol to be used for LDAP. The default setting is Off.

Use the procedure below to make the setting.

1

In the Sys. Menu/Count. menu, press the  or 
key to select [System], and press the OK key.

When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select

key).

2

The System menu appears.

3

Press the  or  key to select [Network Setting].

4

Press the OK key. The Network Setting menu
appears.

5

Press the  or  key to select [Secure Protocol].

Sys. Menu/Count.: a b
1 Report
2 Counter
*********************

[

Exit

]

3 System

Login User Name:

L

b

*******************

Login Password:

[ Login

]

System:

a b

*********************
2 I/F Block Set.
3 Security Level

[

Exit

]

1 Network Setting

Network Setting: a b
*********************
8 Host Name
9 LAN Interface

[

Exit

]

7 Secure Protocol

This manual is related to the following products: