Color / grayscale / black and white selection, Color / grayscale / black and white selection -19, Ge 5-19 – TA Triumph-Adler DCC 6526L User Manual
Page 198
Sending Functions
5-19
5
Color / Grayscale / Black and White Selection
This feature allows you to select the select the color mode used for scanning when sending images. You can
select from Auto(Color/Gray), Auto(Color/B&W), Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
1
Press the Send key.
2
Place the originals on the platen or in the
document processor.
3
Press the Function Menu key. Function Menu
appears.
4
Press the or key to select [Color Selection].
5
Press the OK key. Color Selection appears.
6
Press the or key to select the desired color
mode.
7
Press the OK key.
Completed.
is displayed and the screen returns to
the basic screen for sending.
8
Specify the destination, and press the Start key to
start sending.
Function Menu:
a
b
*********************
2 Original Size
T
3 Original Image
T
[
Exit
]
1 Color Selection g
Color Selection:
a
b
*********************
2 Auto(Color/B&W)
3 Full Color
1 *Auto(Color/Gray)