Color balance, Color balance -20, Ge 4-20 – TA Triumph-Adler DCC 6526L User Manual
Page 173
Copying Functions
4-20
Color Balance
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE:
This feature is used with full color copying.
This feature can not be used together with Adjusting Density on page 3-9.
Refer to the sample image in Color balance adjustment on Appendix-22.
Follow the steps below to adjust color balance.
1
Press the Copy key.
2
Place the originals on the platen or in the
document processor.
3
Press the Function Menu key. Function Menu
appears.
4
Press the or key to select [Color Balance].
5
Press the OK key. Color Balance appears.
6
Press the or key to select [On].
7
Press the OK key. A selection menu for the color to
be adjusted appears.
8
Press the or key to select the color to be
adjusted.
9
Press the OK key. The color adjustment menu
appears.
Function Menu:
a
b
*********************
2 Collate
T
3 Duplex
T
[
Exit
]
1 Paper Selection g
Color Balance:
a
b
*********************
2 On
1 *Off
Color Balance:
a
b
*********************
2 Magenta
3 Yellow
1 Cyan
Cyan:
a
b
*********************
2 -4
3 -3
1 *-5