TA Triumph-Adler DCC 6526L - Manual (Page 103)

Basic Operation
3-2
Login/Logout
If user login administration is enabled, it is necessary to enter the Login User Name and Login Password to use
the machine.
NOTE: You will be unable to log in if you forget your Login User Name or Login Password. In this event, log in
with administrator privileges and change your Login User Name or Login Password.
By default, one of each default user with machine administrator rights and administrator privileges is already
stored. The following are the default user's properties.
User Name: DeviceAdmin
Login User Name: 2600
Login Password:
2600
Access Level: Administrator
It is recommended to periodically change the user name, Login User Name and Login Password regularly for
your security.
Login
NOTE: Refer to Character Entry Method on Appendix-8 for details on entering characters.
1 If the screen shown appears during operations,
enter the Login User Name.
2 Press the  key. The input cursor moves to Login
Password.
3 Enter the Login Password.
Press the  key to move the input cursor to Login
User Name.
4 Check the Login User Name and Login Password
are correct, and press [Login] (the Right Select
key).
Logout
To logout from the machine, press the Logout to return
to the Login User Name/password entry screen.
Login User Name:
L b
*******************
Login Password:
[ Login ]