TA Triumph-Adler DCC 6526L - Manual (Page 119)

Basic Operation
3-18
After pressing the OK key, select the binding edge
of the finished copies and the original setting
orientation.
If you select [2-sided>>1-sided], press [Detail] (the
Right Select
key) and you can select the binding
edge of the original and the original setting
orientation.
After pressing the OK key, select the binding edge
of the original and finished copies, and the original
setting orientation.
If you select [2-sided>>2-sided], press [Detail] (the
Right Select
key) and you can select the binding
edge of the original and the original setting
orientation.
After pressing the OK key, select the binding edge
of the finished copies and the original setting
orientation.
After pressing the OK key, select the binding edge
of the original and finished copies, and the original
setting orientation.
5 Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
Orig.Orientation: a
b
*********************
2 d Top Edge left 1 *c Top Edge Top
Orig. Binding:
a b
*********************
2 p Top 1 *o Left/Right
Orig.Orientation: a
b
*********************
2 d Top Edge left 1 *c Top Edge Top
Orig. Binding:
a b
*********************
2 p Top 1 *o Left/Right
Finish. Binding:
a b
*********************
2 d Top Edge left 1 *c Top Edge Top
Orig.Orientation: a
b
*********************
2 d Top Edge left 1 *c Top Edge Top