Auto panel reset, Auto panel reset …8-128 – TA Triumph-Adler DCC 6526L User Manual
Page 373
Default Setting (System Menu)
8-128
11
Press the or key to select [Permit] or
[Prohibit] for the energy saver. When [Permit] is set
for a function and that function sends data to the
machine when the machine is in Energy Saver
mode, the machine will not execute the function.
12
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE:
Refer to page 8-29 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting. The default setting is On.
1
In the Sys. Menu/Count. menu, press the or
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or key to select [Timer Setting], and
press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[
Exit
]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[
Exit
]
1 Language
Login User Name:
L
b
*******************
Login Password:
[ Login
]