beautypg.com

Responding to error messages, Alphanumeric, Responding to error messages -8 – TA Triumph-Adler DCC 6526L User Manual

Page 435

background image

Troubleshooting

10-8

Responding to Error Messages

If the control panel displays any of these messages, follow the corresponding procedure.

If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the
following pages. If the problem persists, contact your Service Representative.

Alphanumeric

Error Message

Checkpoints

Corrective Actions

Reference

Page

Load paper in cassette
1.

Is the indicated cassette out

of paper?

Load paper.

2-27

Load paper in MP
Tray.

Is the paper of the selected

size loaded in the multi

purpose tray?

Load the paper in the multi purpose

tray which is of the size and type

indicated on the Message Display.

2-30

Toner is running out.
[C], [M], [Y], [K]

It is almost time to replace the toner

container. After a certain number of

pages (about 20) are printed, printing

will stop. Obtain a new toner

container of the color indicated in [].

9-4

Add toner.

[C], [M], [Y], [K]

Replace the toner container. Replace

with a toner container of the color

indicated in [].

9-4

Check waste toner
box.

Is the waste toner box full?

Replace the waste toner box.

9-6

Is the waste toner box

installed?

Install the waste toner box in the

machine.

9-6

Cannot connect to
Authentication Server.

Press the OK key and check the

following items:
• Registration to Authentication

Server

• Password and computer address

for Authentication Server

• Connection of Network

Cannot duplex print
on this paper.

Did you select a paper size/

media type that cannot be

duplex printed?

Select the available paper type.

Press the OK key to print without

using Duplex.

3-16

Incorrect account ID.
Job is canceled.

This job is canceled because it is

restricted by Job Accounting. Press

the OK key.

Close top (rear or left)
cover.

Is there any cover which is

open?

Close the cover indicated on the

control panel.

Close Document
Processor.

Is the document processor

open?

Close the document processor.

Is the top cover of the

document processor open?

Close the top cover of the document

processor.

2-45

This manual is related to the following products: