TA Triumph-Adler DCC 6526L - Manual (Page 325)

Default Setting (System Menu)
8-80
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Emuration Set.].
4 Press the OK key. Emuration Set. appears.
5 Press the  or  key to select the printer you want
to emulate.
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
NOTE: If you select [KPDL] or [KPDL(Auto)], the
operation after selecting the emulation is different from
others.
If you select [KPDL], refer to page 8-80.
If you select [KPDL(Auto)], refer to page 8-81.
When KPDL Is Selected for Emulation
When you use the KPDL emulation mode, set whether or not to output KPDL error reports. The default setting
is Off.
Use the procedure below to make the setting.
1 In Emulation Set, press the  or  key to select
[KPDL].
2 Press the OK key. KPDL Error Rpt appears.
Printer:
a b
*********************
2 Color Setting
3 EcoPrint
[ Exit ]
1 Emulation Set.
Emulation Set.:
a b
*********************
2 KPDL
3 KPDL(Auto) 1 *PCL6
Emulation Set.:
a b
1 PCL6
*********************
3 KPDL(Auto)
2 KPDL
KPDL Error Rpt:
a b
*********************
2 On 1 *Off