TA Triumph-Adler DCC 6526L - Manual (Page 371)

Default Setting (System Menu)
8-126
6 Press the OK key. Sleep Timer appears.
7 Press the  or  key to set the Sleep Timer. Set
the amount of time before entering the sleep state
in minutes. You cannot use the numeric keys to
enter this value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Sleep Level
Detailed settings can be selected for sleep mode. Detailed settings for sleep mode are called Energy Saver
mode. When a function is set in Energy Saver mode and the function sends data to the machine, the machine
does not execute the function. When Quick Recovery is specified, the machine wakes from sleep mode when
any kind of data is received.
Example: When print data is sent from a PC connected by USB
NOTE: On a product with the fax function, the setting is fixed at Quick Recovery.
Use the procedure below to specify the Sleep Level.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [Timer Setting], and
press the OK key.
Sleep Timer:
D b
(1 - 240)
******15*min.
Quick Recovery When the machine receives print data, it wakes from sleep mode and starts
printing.
Energy Saver The machine does not wake from sleep mode when it receives print data and
printing does not take place.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language