Enabling/disabling group authentication – TA Triumph-Adler DCC 6526L User Manual
Page 459
Management
11-10
5
The overwrite confirmation screen appears.
Press [Yes] (the Left Select key). The user
information is changed and the screen returns to
Local User List.
Deleting a user
1
Press the or key to select the user you want
to delete, and then press [Menu] (the Right Select
key).
2
Press the or key to select [Delete] and then
press the OK key.
3
In the delete confirmation screen, press [Yes] (the
Left Select
key). The user is deleted and the
screen returns to Local User List.
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.]
is selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide
of the LDAP server. This menu can be used only when [Netwk Authentic.] is selected as the user authentication
method.
Use the procedure below to enable group authentication.
NOTE:
Refer to Character Entry Method on Appendix-8 for details on entering characters.
NOTE:
You can configure detail settings of group authentication in Embedded Web Server. For details, refer
to the Embedded Web Server Operation Guide.
1
See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
2
Press the or key to select [User Login Set.].
3
Press the OK key. The User Login Set. menu
appears.
Local User List: a b
l DeviceAdmin
*********************
l User1
[
Menu
]
l Admin
Menu:
a b
1 Detail/Edit
*********************
3 Add User
2 Delete
User Login Set.:
a
b
*********************
2 Local User List
3 Group Auth.
[
Exit
]
1 User Login