Wsd scan setup, Wsd scan setup …8-154 – TA Triumph-Adler DCC 6526L User Manual
Page 399
Default Setting (System Menu)
8-154
6
Press the OK key. AppleTalk appears.
7
Press the or key to select [On] or [Off] and
then press the OK key.
Completed.
is displayed and the screen returns to
the Network Setting menu.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
1
In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
2
The System menu appears.
3
Press the or key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
AppleTalk a
b
1 Off
*********************
2 *On
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[
Exit
]
3 System
Login User Name:
L
b
*******************
Login Password:
[ Login
]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[
Exit
]
1 Network Setting
Network Setting: a b
*********************
2 NetWare
3 AppleTalk
[
Exit
]
1 TCP/IP Settings