TA Triumph-Adler DCC 6526L - Manual (Page 185)

Sending Functions
5-6
Zoom
Scans the original by automatically zooming it depending on the sending size.
Part that is operated
The table below lists the available options.
NOTE: When zooming in or out, see Sending Size on page 5-4 when selecting the sending size.
When Custom Size or Size Entry is selected as the original size, the originals are sent at normal size and
zooming cannot be used.
Depending on the combination of original size and sending size, the image is placed at the edge of the paper.
Use the procedure below to enlarge or reduce the original to match the transmission size.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Select the transmission size.
4 Press the Function Menu key. Function Menu
appears.
5 Press the  or  key to select [Zoom].
Item Detail
100% No Zoom (to be scanned at actual size)
Auto Zoomed automatically according to the specified
sending size.
Function Menu:
a b
*********************
2 Original Size
T
3 Original Image T
[ Exit ]
1 Color Selection g