TA Triumph-Adler DCC 6526L - Manual (Page 326)

Default Setting (System Menu)
8-81
8
3 Press the  or  key to select [Off] or [On].
4 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
When KPDL(Auto) Is Selected for Emulation
When you select [KPDL(Auto)], set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
1 In Emulation Set, press the  or  key to select
[KPDL(Auto)].
2 Press the OK key. KPDL Error Rpt appears.
3 Press the  or  key to select [Off] or [On].
4 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Emulation Set.:
a b
1 PCL6
2 KPDL
*********************
3 KPDL(Auto)
KPDL Error Rpt:
a b
*********************
2 On 1 *Off