Send/box density, Send/box density …8-102 – TA Triumph-Adler DCC 6526L User Manual
Page 347
Default Setting (System Menu)
8-102
5
Press the or key to select [Auto] or [Manual].
6
Press the OK key. This displays the density
selection screen for the mode selected in step 5.
The screen shown is the one when [Manual] is
selected.
7
Press the or key to select the density from [-
3 Lighter] to [+3 Darker].
8
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
Send/Box Density
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels
both in auto and manual density modes.
1
In the Sys. Menu/Count. menu, press the or
key to select [Adjust/Maint.].
2
Press the OK key. The Adjust/Maint. menu
appears.
3
Press the or key to select [Send/Box
Density].
4
Press the OK key. Send/Box Density appears.
5
Press the or key to select [Auto] or [Manual].
Manual:
a
b
3 -1
*********************
5 +1
4 * 0 Normal
Sys. Menu/Count.: a b
: Document Box
; Edit Destination
*********************
[
Exit
]
< Adjust/Maint.
Adjust/Maint.:
a b
*********************
2 Send/Box Density
3 AutoColorCorrect
[
Exit
]
1 Copy Denst. Adj.
Send/Box Density: a b
*********************
2 Manual
[
Exit
]
1 Auto