TA Triumph-Adler DCC 6526L User Manual
Page 416
Default Setting (System Menu)
8-171
8
Optional interface (Optional interface card setting)
This locks and protects the optional interface slot. The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [System].
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
2
The System menu appears.
3
Press the or key to select [I/F Block Set.].
4
Press the OK key. The I/F Block Set. menu
appears.
5
Press the or key to select [Option I/F 1] or
[Option I/F 2].
6
Press the OK key. Option I/F appears.
7
Press the or key to select [Unblock] or
[Block].
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[
Exit
]
3 System
Login User Name:
L
b
*******************
Login Password:
[ Login
]
System:
a b
1 Network Setting
*********************
3 Security Level
[
Exit
]
2 I/F Block Set.
I/F Block Set.:
a b
1 USB Host
2 USB Device
*********************
[
Exit
]
3 Option I/F1
Option I/F1:
a b
*********************
2 Block
1 *Unblock