Netware setup, Netware setup …8-151 – TA Triumph-Adler DCC 6526L User Manual
Page 396
Default Setting (System Menu)
8-151
8
2
The System menu appears.
3
Press the or key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
5
Press the or key to select [TCP/IP Settings].
6
Press the OK key. The TCP/IP Settings menu
appears.
7
Press the or key to select [IPv6 Setting].
8
Press the OK key. IPv6 Setting appears.
9
Press the or key to select [On] or [Off].
10
Press the OK key. Completed. is displayed and the
screen returns to the TCP/IP Settings menu.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is "On".
Use the procedure below to setup the NetWare setting.
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[
Exit
]
1 Network Setting
Network Setting: a b
*********************
2 NetWare
3 AppleTalk
[
Exit
]
1 TCP/IP Settings
TCP/IP Settings: a b
*********************
2 IPv4 Setting
3 IPv6 Setting
[
Exit
]
1 TCP/IP
IPv6 Setting:
a b
*********************
2 On
[
Exit
]
1 *Off