Altitude adj. (altitude adjustment setting), Altitude adj. (altitude adjustment setting) …8-114 – TA Triumph-Adler DCC 6526L User Manual
Page 359
Default Setting (System Menu)
8-114
4
Press the OK key. The Service Setting menu
appears.
5
Press the or key to select [Drum Refresh].
6
Press the OK key. A confirmation screen appears.
7
Press [Yes] (the Left Select key). Completed. is
displayed and the screen returns to the Adjust/
Maint. menu.
Altitude Adj. (Altitude adjustment setting)
This sets the altitude adjustment mode. If you are using the machine at an altitude of 1500 m or higher and print
quality has deteriorated, the Altitude Adjustment mode setting can be used to restore print quality.
Use the procedure below to set the altitude adjustment setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [Adjust/Maint.].
2
Press the OK key. The Adjust/Maint. menu
appears.
3
Press the or key to select [Service Setting].
Service Setting: a b
*********************
2 Network Status
3 Test Page
[
Exit
]
1 Service Status
Start the drum
refresh.
Are you sure?
[
Yes
] [
No
]
Sys. Menu/Count.: a b
; Document Box
< Edit Destination
*********************
[
Exit
]
= Adjust/Maint.
Adjust/Maint.:
a b
*********************
2 Send/Box Density
3 AutoColorCorrect
[
Exit
]
1 Copy Denst. Adj.