TA Triumph-Adler DCC 6526L - Manual (Page 110)

Basic Operation
3-9
3
Adjusting Density
Use this procedure to adjust the density when copying.
Part that is operated
NOTE: You may choose Auto mode as the default setting (refer to Density on page 8-37). When the color
mode is set to full color, automatic setting is not possible.
The procedure for adjusting the density of copies is explained below.
1 Press the Function Menu key. Function Menu
appears.
2 Press the  or  key to select [Density].
3 Press the OK key. Density appears.
4 Press the  or  key to select [Auto] or [Manual].
Density Adjustment Option Description
Manual Adjust density using 7 levels.
Auto Optimum density is selected according
to the density of the original.
Function Menu:
a b
*********************
2 Collate
T
3 Duplex T
[ Exit ]
1 Paper Selection g
Density:
a b
1 Auto
*********************
2 *Manual