TA Triumph-Adler DCC 6526L User Manual
Page 66
Preparation before Use
2-21
2
IMPORTANT:
When the DHCP Setting (page 2-14) is
[On], the current Subnet Mask is displayed and cannot
be changed.
When setting an Subnet Mask, set the DHCP Setting
(page 2-14) to Off.
28
Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
29
Press the or key to select [Default Gateway].
30
Press the OK key. Default Gateway appears.
31
Use the arrow keys to enter the Default Gateway.
Press the or key to move the cursor position
horizontally.
Press the or key or the numeric keys to enter
the Default Gateway. Each 3 digits can be set
between 000 and 255.
IMPORTANT:
When the DHCP Setting (page 2-14) is
[On], the current Default Gateway is displayed and
cannot be changed.
When setting an Default Gateway, set the DHCP
Setting (page 2-14) to Off.
32
Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
IPv4 Setting:
a
b
3 IP Address
4 Subnet Mask
*********************
[
Exit
]
5 Default Gateway
Default Gateway:
a
b
123.145.167.189