Adding a user – TA Triumph-Adler DCC 6526L User Manual
Page 455
Management
11-6
Adding a User
This adds a new user. You can add Up to 21 users (including the default Login User Name). The table below
explains the user information to be registered.
NOTE:
By default, one of each default user with machine administrator rights and administrator privileges is
already stored. The following are the default user's properties.
User Name:
DeviceAdmin
Login User Name: 2600
Login Password:
2600
Access Level:
Administrator
It is recommended to periodically change the user name, Login User Name and Login Password regularly for
your security.
Use the procedure below to register a new user.
NOTE:
Refer to Character Entry Method on Appendix-8 for details on entering characters.
1
Log in as a user with administrator rights.
2
See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
3
In the User/Job Account menu, press the or
key to select [User Login Set.].
Item
Description
User Name*
*
Mandatory at user registration.
Enter the name displayed on the user list (up to 32
characters).
Login User
Name*
Enter the Login User Name to log in (up to 32
characters). The same Login User Name cannot be
registered.
Login
Password*
Enter the password to log in (up to 64 characters).
Access Level*
Select Administrator or User for user access
privileges.
Account Name
Add an account where the user belongs. The user,
who registered his/her account name, can log in
without entering the account ID. Refer to Job
E-mail Address
The user can register his/her E-mail address. The
registered address will be automatically selected
for subsequent operations that need any E-mail
function.
User/Job Account: a
b
*********************
2 Job Account. Set.
3 Unknown ID Job
[
Exit
]
1 User Login Set.