TA Triumph-Adler DCC 6526L - Manual (Page 205)

Sending Functions
5-26
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE: For information on operating the computer, refer to the operating system help for your computer.
To use WSD Scan, WSD Scan Setup (page 8-154) must be set to [On] in the network settings.
Installing the driver
1 Select Start button of the Windows display, and
then Network.
2 Select the machine displayed Multifunctional
Devices
, and then right-click Install.
Installing of the driver starts.
3 After installing the driver, click Close.
Procedure using this machine
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
Displays the screen for sending.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
3 Press the  or  key to select [WSD Scan].
4 Press the OK key. WSD Scan appears.
5 Press the  or  key to select [From Oper. Panel].
Send to:
a b
2 G Folder(SMB)
3 H Folder(FTP)
*********************
4 P WSD Scan
WSD Scan:
a b
1 From Computer
*********************
[ Exit ]
2 From Oper. Panel