TA Triumph-Adler DCC 6526L - Manual (Page 397)

Default Setting (System Menu)
8-152
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
2 The System menu appears.
3 Press the  or  key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the  or  key to select [NetWare].
6 Press the OK key. NetWare appears.
7 Press the  or  key to select [On] or [Off].
If you select [On] and press the OK key, Frame
Type appears. Press the  or  key to select the
desired frame type.
The available frame types are as follows:
Auto
802.3
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name:
L b
*******************
Login Password:
[ Login ]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Network Setting: a b
*********************
2 NetWare
3 AppleTalk
[ Exit ]
1 TCP/IP Settings
NetWare:
a b
*********************
2 On 1 *Off
Frame Type:
a b
*********************
2 802.3
3 Ether-II 1 *Auto