TA Triumph-Adler DCC 6526L - Manual (Page 393)

Default Setting (System Menu)
8-148
Restarting the System
Restart the machine without turning the main power switch off. Use this to deal with any unstable operation by
the machine. (Same as the computer restart.)
Use the procedure below to restart the system.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
2 The System menu appears.
3 Press the  or  key to select [Restart].
4 Press the OK key. A confirmation screen appears.
5 Press [Yes] (the Left Select key). The machine is
restarted.
If you press [No] (the Right Select key), the
machine does not restart and the screen returns to
the System menu.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name:
L b
*******************
Login Password:
[ Login ]
System:
a b
3 Security Level
*********************
5 Op Functions
[ Exit ]
4 Restart
Restart.
Are you sure?
[ Yes ] [ No ]