TA Triumph-Adler DCC 6526L - Manual (Page 305)

Default Setting (System Menu)
8-60
6 Press the OK key. A confirmation screen appears.
7 Press [Yes] (the Left Select key). The machine is
restarted.
RAM Disk Mode
When optional memory is installed, a RAM disk can be created and its size can be set. Creating a RAM disk
makes it possible to print from a Job Box.
The procedure for setting the RAM Disk Mode is explained below.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [RAM Disk Mode].
4 Press the OK key. RAM Disk Mode appears.
5 Press the  or  key to select [Off] or [On].
6 Press the OK key. If [Off] is selected and the OK
key is pressed, proceed to step 8. If [On] is
selected, the RAM disk size screen appears.
Restart.
Are you sure?
[ Yes ] [ No ]
Sys. Menu/Count.: a
b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings:
a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
RAM Disk Mode:
a b
*********************
2 On 1 *Off
RAM Disk Mode:
D b
(1 - 256)
**216* MB