TA Triumph-Adler DCC 6526L - Manual (Page 431)

Troubleshooting
10-4
Is the paper curled, folded or
wrinkled? Replace the paper with new paper. 2-26
Are there any loose scraps or
jammed paper in the
machine? Remove any jammed paper. 10-16
Printouts are wrinkled
or curled. Is the paper damp? Replace the paper with new paper. 2-26
Cannot print. Is the machine plugged in? Plug the power cord into an AC
outlet. —
Is the machine powered on? Turn on the main power switch. 2-7
Is the printer cable or
network cable connected? Connect the correct printer cable or
network cable securely. 2-5
Was the machine powered
on before the printer cable
was connected? Power on the machine after
connecting the printer cable. 2-5
2-7
Is the print job paused? Press [Resume] (the Left Select
key) to resume printing. 7-18
Documents are
printed improperly. Are the application software
settings at the PC set
properly? Check that the Printing System
Driver and application software
settings are set properly. —
Cannot print with USB
memory. Is the USB host blocked? Select [Unblock] in the USB host
settings. 8-168
— Check that the USB memory is
securely plugged into the machine. —
When displaying an
image sent from the
machine on the PC, an
image size is shrunk
vertically or
horizontally. Have you selected
200×100dpi Normal or
200×400dpi Super Fine for
the scan resolution? Select a scan resolution other than
200×100dpi Normal or 200×400dpi
Super Fine when sending an
image. 5-18
USB memory not
recognized. — Check that the USB memory is
securely plugged into the machine. —
Is the USB host blocked? Select [Unblock] in the USB host
settings. 8-168
Skewed-color printout — Conduct color registration using
the operation panel. 8-104
Conduct color calibration using the
operation panel. 8-104
Symptom Checkpoints Corrective Actions
Reference
Page