TA Triumph-Adler DCC 6526L - Manual (Page 189)

Sending Functions
5-10
Original Orientation
To send the document in the orientation that can be read properly, specify the upper orientation of original. To
use the functions below, select the orientation in which the original is set on the platen.
• 1-sided / 2-sided Selection
When placing the original on the platen
When placing the original on the document processor
Use the procedure below to select the orientation when placing the originals on the platen for sending.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Orig.Orientation].
[Top Edge Top] [Top Edge Left]
[Top Edge Top] [Top Edge Left]
Function Menu:
a b
*********************
2 Original Size
T
3 Original Image T
[ Exit ]
1 Color Selection g