Appletalk setup, Appletalk setup …8-153 – TA Triumph-Adler DCC 6526L User Manual
Page 398
Default Setting (System Menu)
8-153
8
Ether-II
802.2
SNAP
8
Press the OK key. Completed. is displayed and the
screen returns to the Network Setting menu.
For detailed information on restarting the system,
refer to Restarting the System on page 8-148.
AppleTalk Setup
Select the Apple Talk network connection. The default setting is On.
Use the procedure below to setup the AppleTalk setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select
key).
2
The System menu appears.
3
Press the or key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
5
Press the or key to select [AppleTalk].
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[
Exit
]
3 System
Login User Name:
L
b
*******************
Login Password:
[ Login
]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[
Exit
]
1 Network Setting
Network Setting:
a
b
*********************
2 NetWare
3 AppleTalk
[
Exit
]
1 TCP/IP Settings