Magnum Energy AGS Network (ME-AGS-N) - Manual (Page 9)

3 © 2012 Magnum Energy, Inc.
1.0 Introduction
4
1
2
3
6 7
5
8
Figure 1-1, Components of the ME-AGS-N Module
Figure 1-2, Remote Temp Sensor Cable (60 ft.)
READY Indicator – a green LED indicator that illuminates to signal
that the AGS is powered (blinks if the optional temp sensor is not
connected).
NETWORK Connection Port (green label) – a RJ14 port (6P4C
- 6 position, 4-contact female connection) which provides the
connection point for the network communication cable.
REMOTE Connection Port (purple label) – a RJ14 port (6P4C - 6
position, 4-contact female connection) that provides the connection
point for the remote temperature sensor cable (see Figure 1-2).
Internal Access Screws – four #6-32 x 3/8 Phillips screws that
must be removed to access the DC Input Jumper and the 4-position
DIP Switch.
5
6
7
Temperature
Sensor
8