Magnum Energy AGS Network (ME-AGS-N) - Manual (Page 14)

2.0 Installation
© 2012 Magnum Energy, Inc. 8
Figure 2-6, Connecting the AGS to a Magnum Inverter (Large)
Large Magnum inverter
ME-AGS-N
Network Communications
cable from AGS NETWORK
(green) port to inverter’s
Network (green) port
Remote cable to
inverter’s Remote
(blue) port
Remote
Inverting
DC 12.6V 5A
Figure 2-5, Connecting the AGS to a Magnum Inverter (Small)
Remote
ME-AGS-N
Small Magnum inverter
Phone splitter that connects
AGS network cable (from
AGS’s green NETWORK port)
and remote’s cable to
inverter’s Remote (blue) port
Inverting
DC 12.6V 5A
Connecting the AGS to a Magnum inverter: Connect one end of the
communication cable to the AGS’s RJ14 NETWORK (green) port, and then:
• Small
inverter (MM/MMS Series) – connect the other end of the
communication cable to a phone splitter, and then connect the splitter
to the REMOTE (blue) port on the small Magnum inverter (see Figure
2-5); or,
• Large inverter (ME, RD, MS, MS-PAE Series) – connect the other
end of the communication cable to the RJ14 Network port (green) on the
large Magnum inverter (see Figure 2-6).