Yaskawa MP3200 Troubleshooting Manual - Manual (Page 9)

ix
 Installation
• Do not install the Machine Controller in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed the operating conditions
• Locations that are subject to ambient humidity that exceeds the operating conditions
• Locations that are subject to rapid temperature changes and condensation
• Locations that are subject to corrosive or inflammable gas
• Locations that are subject to excessive dust, dirt, salt, or metallic powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock
There is a risk of fire, electrical shock, or device damage.
• Never install the Machine Controller in an atmosphere containing halogen (fluorine, chlorine,
bromine, or iodine).
There is a risk of malfunction or damage.
• Do not step on the Machine Controller or place heavy objects on the Machine Controller.
There is a risk of injury or an accident.
• Do not block the air exhaust ports on the Machine Controller. Do not allow foreign objects to
enter the Machine Controller.
There is a risk of internal element deterioration, malfunction, or fire.
• Always mount the Machine Controller in the specified orientation.
There is a risk of malfunction.
• Leave the specified amount of space between the Machine Controller, and the interior surface
of the control panel and other devices.
There is a risk of fire or malfunction.
• Do not subject the Machine Controller to strong shock.
There is a risk of malfunction.
• Suitable battery installation must be performed and it must be performed only by an experi-
enced technician.
There is a risk of electrical shock, injury, or device damage.
• Do not touch the electrodes of the Battery.
Static electricity may damage the electrodes.
CAUTION