Yaskawa MP3200 Troubleshooting Manual - Manual (Page 160)

7.5 System Register Configuration and Error Status
Interrupt Status
7-34
Interrupt Status
The data in these registers give the status of information on interrupts from each I/O Module.
Detailed interrupt information is available in system registers SW00698 to SW00789.
Register Configuration
Details
The following table gives details on the Interrupt Module.
Name Register Addresses Remarks
Interrupt Detection Count SW00698 −
Module Where an Interrupt Occurred SW00699
Number of Modules with a single inter-
rupt
Interrupt Modules
SW00700 to
SW00702
Interrupt Module 1
SW00703 to
SW00705
Interrupt Module 2
SW00787 to
SW00789
Interrupt Module 30
Register Address Remarks
SW007 + 0
Rack No., Unit No., Slot No.
SW007 + 1
Interrupt Type
1: Reserved for system.
2: DI interrupt for LIO-01, LIO-02, LIO-04, or LIO-05
3: Counter interrupt for LIO-01, LIO-02, LIO-06, or CNTR-01
SW007 + 2
Register value for hardware interrupt cause
Depends on the hardware.
·· ··
 hex
01 to 09: Gives the slot number where the Module in which the inter-
rupt occurred is mounted.
1 to 4: Gives the unit number of the Module in which the interrupt
occurred is mounted.
1 to 7: Gives the Rack number where the Module in which the inter-
rupt occurred is mounted.