Yaskawa MP3200 Troubleshooting Manual - Manual (Page 130)

7.2 Viewing the Contents of the System Registers
7-4
7.2 Viewing the Contents of the System Registers
To view the contents of the system registers, start the MPE720 Engineering Tool and display a register list.
Use the following procedure to display the register list.
1. Display the Register List 1 Pane in MPE720 version 7.0.
By default, there will be a Register List 1 Tab at the bottom of the Pane.
2. Enter the register address of the first system register to display in the Register Box in the form
SW. The contents of the system registers starting with the specified first register will be
displayed.
Note: By default, the data type will be decimal. Right-click in the list and select Hexadecimal from the pop-up menu to
display hexadecimal values (as shown above).