Yaskawa G7 Drive - Manual (Page 379)

6
-162
„ Application Precautions
The DI-08 will not function if F3-01 is set to 6
„ Selecting the Digital Reference
The range of the digital references is determined by the combination of the settings of o1-03 and F3-01. The
information monitored in U1-01 (Frequency reference) will also change.
DI-16H2 Reference Ranges
When using the DI-16H2, the following ranges can be set depending on the settings of the parameters.
Terminal Pin No.
8-bit Binary with Sign 2-digit BCD with Sign
F3-01 = 7 F3-01 = 0 to 5
TC
1 Bit 1 (2 0 ) 1
BDC digit 1
(0 to 9)
2 Bit 1 (2 1 ) 2
3 Bit 1 (2
2
) 4
4 Bit 1 (2 3 ) 8
5 Bit 1 (2 4 ) 1
BDC digit 2
(0 to 15)
6 Bit 1 (2 5 ) 2
7 Bit 1 (2
6
) 4
8 Bit 1 (2 7 ) 8
9 Sign signal
10 SET (read) signal
11 Reference common signal (0 V)