Yaskawa J7 Drive - Manual (Page 49)

5-14
Continued
n07 : Reference Selection - Digital Operator Factory setting: 0
Range: 0 or 1
This parameter is only effective when the Drive is in the local mode.
n08 : Frequency Reference Setting Factory setting: 0
Method From Digital Operator Range: 0 or 1
This parameter is only effective when the frequency reference is controlled by a digital preset ( n21 ).
SETTING DESCRIPTION
0 Frequency reference is controlled by the digital operator potentiometer
1 Frequency reference is controlled by a digital preset speed ( n21 ) and is affected by n08 .
SETTING DESCRIPTION
0
key must be pressed in order for the Drive to accept the frequency reference.
1 key does not have to be pressed.
The Drive responds immediately to the and keys.
DATA
ENTER
DATA
ENTER
5.13 LOCAL/REMOTE REFERENCE AND SEQUENCE SELECTION