2 - initial start-up, 1 pre-power checks, Initial start-up – Yaskawa J7 Drive User Manual

Page 26: Pre-power checks -1

2-1

• Verify wires are properly connected and no erroneous grounds exist.

• Remove all debris from the enclosure, such as loose wire clippings, metal shavings, etc.

• Verify all mechanical connections are tight.

• Verify motor is not connected to load.

• Apply input power only after the front cover is in place. DO NOT remove the front cover or Digital

Operator while input power is on.

2.1 PRE-POWER CHECKS

Section 2. INITIAL START-UP