Yaskawa J7 Drive - Manual (Page 46)

5-11
Continued
Example 2 - Eight preset references
Programming:
n37 = 6, n38 = 7 and n39 = 8
DIGITAL PRESET S5 S4 S3
Selectable Reference (2) Open Open Open
n22 Open Open Closed
n23 Open Closed Open
n24 Open Closed Closed
n25 Closed Open Open
n26 Closed Open Closed
n27 Closed Closed Open
n28 Closed Closed Closed
5.11 FREQUENCY REFERENCE SELECTION
Example 1 - Four preset references
Programming:
n38 = 6 and n39 = 7
DIGITAL PRESET S5 S4
Selectable Reference (2) Open Open
n22 Open Closed
n23 Closed Open
n24 Closed Closed
(2) The Selectable Reference is chosen from the following
list:
C. Jog Reference - See paragraph 5.12
D. Frequency Reference via Serial
Communications
- See paragraph 5.14
REFERENCE SOURCE PROGRAMMING
Digital Operator Speed Pot n03 = 0
Digital Preset Reference parameter n21 n03 = 1
Analog Input Terminal FR n03 = 2, 3, or 4
Serial Communications n03 = 6