Yaskawa J7 Drive - Manual (Page 37)

5-2
A. n16 : Accel Time 1 Factory setting (each): 10.0 seconds
n17 : Decel Time 1
Range (each): 0.0 to 999 seconds
n18 : Accel Time 2 Factory setting (each): 10.0 seconds
n19 : Decel Time 2
Range (each): 0.0 to 999 seconds
The Drive incorporates two sets of individually programmable acceleration and deceleration times.
Setting resolution is 0.1 seconds when set to less than 100 seconds; resolution is 1 second when set
to 100 seconds or more.
B. n36 thru n39 : Multi- Data 11 : Accel/Decel Time Selection
function Inputs (Term. S1 thru S5)
By programming data " 11 " into one of the multi-
function parameters (
n36 thru n39 ), one of the multi-
function input terminals (S2 thru S5) becomes a time
selection input. When the input terminal (i.e. external
contact) is open, Time 1 (
n16 / n17 ) is selected. When
the input terminal is closed, Time 2 ( n18 / n19 ) is
selected.
TIME 1 o
o o
TIME 2
S5
SC
0V
5.2 ACCEL/DECEL TIME