HEIDENHAIN SW 54843x-03 - Manual (Page 83)

HEIDENHAIN MANUALplus 620 83
3.3 Mac
h
ine data
Distance-to-go display X, Y, Z, W: The distance remaining from the current
position to the target position of the active traversing command.
Distance-to-go and protection zone status: Distance-to-go display and display of
status of protection zone monitoring.
Protection zone monitoring
active Protection zone monitoring
not active
Position display for four axes: Display of position values for up to four axes. The
displayed axes depend on the machine configuration.
T number display
 T number of the inserted tool
 Tool compensation values
For all of the T displays:
 T highlighted in color indicates a driven tool
 T number or ID highlighted in color indicates a mirrored tool holder
 T number with index: Multipoint tool
 A letter X/Z of the compensation highlighted in color indicates that a special
compensation is active in the X/Z direction
T ID display
 ID of the inserted tool
 Tool compensation values
T ID display without compensation values
 ID of the inserted tool
Tool compensation
 Special compensation only for recessing tools or button tools
 Special compensation value in gray means special compensation is not active
 A letter X/Z of the compensation highlighted in color indicates that a special
compensation is active in the X/Z direction
Additive compensation
 Compensation values in gray means D compensation is not active
 Compensation values in black means D compensation is active
Elements of machine data display