HEIDENHAIN SW 54843x-03 - Manual (Page 143)

HEIDENHAIN MANUALplus 620 143
4.2 W
o
rk
piece blank cy
cles
4.2 Workpiece blank cycles
Workpiece blank Symbol
Bar/tube blank
Defining the standard blanks.
ICP workpiece blank contour
Free workpiece blank description with
ICP
The workpiece blank cycles describe the workpiece blank
and the setup used. The workpiece blank cycles do not
influence the machining process.
The contours of workpiece blanks are shown during the
simulation of the machining process.