HEIDENHAIN SW 54843x-03 - Manual (Page 606)

606 Organization mode of operation
8.3 T
ransf
er
Importing tool data of the CNC PILOT 4290
The format of the tool list of the CNC PILOT 4290 differs from the
format of the MANUALplus 620. You can use the program converter
to adapt tool data to the new control.
Importing tool data from the connected data medium
Press the Transfer soft key (login required).
Open the menu with the miscellaneous functions.
Open the menu with the import functions.
Press the Tools soft key.
Use the cursor keys to select the folder, then press
the Enter key to switch to the right window.
Use the arrow keys to select the tool data.
Mark all tool data.
Start the import filter for the conversion.
The MANUALplus 620 generates a table named CONV_*.HTT for each
imported file. You can load this table with the Restore function by
setting the file mask to the *.htt file type.