HEIDENHAIN SW 54843x-03 - Manual (Page 148)

148 Cycle programming
4.3 Single cut cy
cles
Move to the tool change position
Call the single-cut menu
Select rapid traverse positioning
Activate the T-Change approach soft key
The tool moves at rapid traverse from the current position to the tool
change position (siehe Seite 142).
After reaching the tool change position, the control switches to the
tool indicated in "T."
Cycle parameters
G14
Sequence (default: 0)
 0: Simultaneous (diagonal path of traverse)
 1: First X, then Z direction
 2: First Z, then X direction
 3: X direction only
 4: Z direction only
T Turret pocket number
ID Tool ID number
MT M after T: M function that is executed after the tool call T.
MFS M at beginning: M function that is executed at the
beginning of the machining step.
MFE M at end: M function that is executed at the end of the
machining step.
WP Displays which workpiece spindle is used to process the
cycle (machine-dependent)
 Main drive
 Opposing spindle for rear-face machining